Before purchasing, please read and agree to the following terms and notices in detail:

1. The company reserves the right to modify the product specifications or related information mentioned above.
2. Any modifications or changes to the product specifications or related information mentioned above will be made without prior notice.
3. If there are changes to the appearance of the hardware equipment, we reserve the right not to notify, provided that the function and performance are not affected.

Microphone:

1. The iCam^® Max 4K Camera has a built-in audio input, with an international standard dual-channel 3.5mm linear input terminal.
2. You can use the teaching broadcast audio system to output sound to the iCam^® Max 4K Camera, such as: MIPRO^® or CHIAYO^® , etc.
3. You can use wireless microphones for audio capture, such as: RODE^® Wireless Me , RODE^® Wireless GO II Single , DJI^® Mic 2 , or SONY^® UWP-D11 , etc.
4. If the lecturer does not wish to hold or wear a microphone, you can install an omnidirectional microphone. Please contact BlueEyes Technology for purchase. For installation precautions, please refer to Microphone Installation Principles .
5. When using musical instruments, it is recommended to use professional instrument recording equipment to achieve the best sound quality, such as: JTS^® , etc.
6. When recording multiple audio sources, it is recommended to use a mixer for better results and easier balance adjustment.
7. The quality of sound transmission depends on the quality of cables and terminals. It is recommended to use high-quality, interference-resistant isolated cables and terminals. If you find noise, electric current sound, or low-frequency hum when using, it is mostly caused by cables and connection terminals.

HDMI Output:

1. The iCam^® Max 4K Camera has a built-in HDMI output, which can output high-definition images and sound through HDMI.
2. The HDMI format is 1080P@30fps.
3. The quality of HDMI transmission depends on the quality of cables and terminals. It is recommended to use high-quality, interference-resistant isolated cables and terminals. If you find noise, electric current sound, or low-frequency hum when using, it is mostly caused by cables and connection terminals.

USB Output:

1. The iCam^® Max 4K Camera has a built-in USB 3.0 output, which can output high-definition images through USB.
2. The length of the USB cable is recommended to be within 5 meters. If it exceeds, please use a USB 3.0 active (Type-A male to Type-B male) extension cable. Click here to find available cables .
3. It is recommended to use a single USB cable without connecting multiple cables together. If your computer shows a notification that the hardware device cannot be recognized, it means that the transmission quality and compatibility of your USB cable are poor. It is recommended to replace it with a higher-quality USB cable.
4. The quality of USB transmission depends on the quality of cables and terminals. It is recommended to use high-quality, interference-resistant isolated cables and terminals. If you find that USB cannot be detected when using, it is mostly caused by cables and connection terminals.
5. For laptops or desktops connected via USB, it is recommended to use the latest Microsoft Windows 11 operating system to avoid driver compatibility issues.
6. Please use the built-in microphone or external microphone for laptops or desktops. If there is a broadcasting audio system on-site, please connect the amplifier or mixer audio output (Line out) or recording output (Rec out) to the audio input (Line in) of the laptop or desktop.

Live Streaming Meetings:

1. The iCam^® Max 4K Camera can be connected to a computer via USB for Zoom / Google Meet / Microsoft Teams / Webex / Skype / LINE live streaming meetings.
2. Before conducting a live streaming meeting, please confirm that the resolution or image quality settings of the meeting software are set to HD or above 720P. Click here to learn how to set live streaming meetings to high definition.

Audio and Video Compression Formats:

1. The iCam^® Max 4K Camera has built-in H.264 and H.265 audio and video compression, which can be switched arbitrarily.
2. When using H.265 compression, the recorded video can be edited using our company's Montage^® Software (version 2.22.7.12 or above) or iFS^® Software (version 2.22.7.12 or above), but cannot be edited using commercial post-production software. If post-production is required, it is recommended to use the H.264 compression format or convert the H.265 video to H.264.

Network:

1. The network terminal socket is RJ-45.
2. The network speed is 10/100 Mbps Ethernet.
3. It is recommended to use Cat.5 network cables with crosstalk and noise protection.
4. It is recommended to use a network switch with 16 ports or more, such as: TP-LINK^® TL-SG1016D , etc.

Network Architecture Principles:

1. All devices are connected to a single network switch.
2. Regardless of the scale, at least a 16-port or 24-port network switch should be used.
3. If there are fewer than 24 network cables, a general unmanaged network switch can be used.
4. If there are more than 24 network cables, use a managed network switch.
5. If you need to connect two 24-port switches in series, remember to use a network switch with stacking (trunk) function.

Reminders:

1. Because the iCam^® Max uses the latest Giga bidirectional protocol network chip, it requires a high-end managed network switch to be used in conjunction. If you are using a general network switch or hub, it is recommended that you first cut off the 8th pin (brown wire) in the RJ-45 connector of the network cable to avoid instantaneous network disconnection issues.
2. When using USB and network image output simultaneously, such as when SES^® host recording and USB live streaming are performed at the same time, if there is screen delay or stuttering, please first disable the image output function (turn off HDMI image output).

Usage Range:

1. To prevent damage to this product or any products connected to it, this product can only be used within the specified range.
2. Do not expose this unit to rain or moisture.
3. To prevent the risk of electric shock, do not open the casing; installation and maintenance can only be performed by qualified technicians.
4. Do not use under conditions exceeding the specified temperature, humidity, or power specifications.
5. When cleaning the camera lens, please use a dry soft cloth to wipe it. If the dirt is severe, use a neutral detergent to gently wipe it. Do not use strong or corrosive cleaners to avoid scratching the lens and affecting the image quality.
6. To avoid fire or short circuit, do not place this unit where it may come into contact with rain or moisture.
7. Do not place any objects that may drip or fall into the machine on the unit.
8. Please secure this unit properly; do not place it in an unstable location to avoid damage caused by falling.
9. Ensure good ventilation of this unit; do not cover the heat dissipation holes, which may cause poor heat dissipation.
10. When cleaning this unit, please use a dry cloth to wipe it; do not use cleaners.
11. Please use original accessories and power supplies; do not use other substitutes to avoid damaging the machine.
12. To avoid fire or short circuit, do not use extension cords or share the same socket with multiple electrical products; do not disassemble the machine's outer cover to avoid damaging the machine.
13. Please ensure proper grounding to prevent lightning strikes that may damage the machine.
14. When there is thunder outdoors, please unplug the camera's power, network, audio, video, and other connectors to avoid product damage caused by lightning strikes. Lightning damage is considered a natural disaster and is not covered by our company's warranty.
15. Do not attempt to repair it yourself or have unqualified personnel perform repairs or replacements. If you have any questions, please contact our company or dealer.
16. This processor and accessories have passed safety tests, and any harmful interference and radiation to the human body are within standard values.

Other Matters:

1. Our company reserves the right to modify, adjust, change, suspend, or terminate this product. If there are any unaddressed matters, they will be handled according to our company's relevant regulations or explanations and may be supplemented and announced at any time.